Gönderen Konu: Bumblebee Nvidia GPU Seçim Hatası - [XORG] (EE) Failed to load module  (Okunma sayısı 3593 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
Merhabalar linuxde çok yeniyim.
kurulum yaparken [XORG] (EE) Failed to load module "mouse" (module does not exist, 0) hatsı alıyorum çözümünü bulamadım yardımcı olursanız sevinirim.

Kod: [Seç]
optirun -vvv glxgears
[ 1958.537502] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1958.537968] [INFO]Configured driver: nvidia
[ 1958.538237] [DEBUG]optirun version 3.2.1 starting...
[ 1958.538266] [DEBUG]Active configuration:
[ 1958.538287] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1958.538306] [DEBUG] X display: :8
[ 1958.538320] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-370:/usr/lib32/nvidia-370
[ 1958.538331] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1958.538339] [DEBUG] Accel/display bridge: auto
[ 1958.538353] [DEBUG] VGL Compression: proxy
[ 1958.538363] [DEBUG] VGLrun extra options:
[ 1958.538378] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1958.538460] [DEBUG]Using auto-detected bridge virtualgl
[ 1958.850852] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 1958.850869] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 1958.850874] [DEBUG]Socket closed.
[ 1958.850888] [ERROR]Aborting because fallback start is disabled.
[ 1958.850891] [DEBUG]Killing all remaining processes.

Kod: [Seç]
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-370
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-370:/usr/lib32/nvidia-370
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-370/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Kod: [Seç]
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:0a:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

Kod: [Seç]
cat /etc/X11/xorg.conf


Kod: [Seç]
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                                    3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                             3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-370                                   370.28-0ubuntu0~gpu16.04.2                 amd64        NVIDIA binary driver - version 370.28
ii  nvidia-modprobe                              361.28-1                                   amd64        utility to load NVIDIA kernel modules and create device nodes
ii  nvidia-opencl-icd-370                        370.28-0ubuntu0~gpu16.04.2                 amd64        NVIDIA OpenCL ICD
ii  nvidia-settings                              370.28-0ubuntu0~gpu16.04.1                 amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                       20150328-3~xenialppa1                      amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                            20150328-3~xenialppa1                      amd64        Shared libraries for primus
ii  primus-libs:i386                             20150328-3~xenialppa1                      i386         Shared libraries for primus
ii  primus-libs-ia32:i386                        20150328-3~xenialppa1                      i386         Shared libraries for primus (32-bit)
ii  virtualgl                                    2.4.1-1~xenialppa1                         amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                         2.4.1-1~xenialppa1                         amd64        Library files for virtualgl

Kod: [Seç]
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
0a:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
[XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

Bir kaç önceki mesajda çözümü mevcut, lütfen aldığınız hataya göre forum içi arama yapmayı ihmal etmeyiniz.

https://forum.linuxmint.net.tr/index.php?topic=6258.msg43120#msg43120
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
maalesef o yolu daha önce  denemiştim ama çözüme ulaşamadım.
ilginiz için teşekkürler
Kod: [Seç]
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:0a:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Aynı sorun benim sistemimde de mevcuttu, öneri ile çözülüyor. Hatta ilgili satırları dosyadan silince aynı hatayı alıyorum. Aşağıdaki komutla Bumblebeee servisini yeniden başlatmayı deneyebilirsiniz.

Kod: [Seç]
sudo service bumblebeed restart
Sorun çözülmezse satırlar ekli olduğu halde aşağıdaki komutun çıktısını yeniden paylaşınız.

Kod: [Seç]
optirun -vvv glxgears
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
malesef ilgili satırlar olmasına rağmen hala aynı hatayı almaya devam ediyorum.
nvidia-370 sürücüsünü kullanıyorum 367 364 361 sürücülerinide ilgili yerleri değiştirerek denedim nedense sonuç aynı
biyerde hata yapıyorum ama bulamadım bi türlü  :)
İLginiz için teşekkürler

Kod: [Seç]
optirun -vvv glxgears
[20870.691068] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[20870.691311] [INFO]Configured driver: nvidia
[20870.691502] [DEBUG]optirun version 3.2.1 starting...
[20870.691511] [DEBUG]Active configuration:
[20870.691519] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[20870.691525] [DEBUG] X display: :8
[20870.691535] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-370:/usr/lib32/nvidia-370
[20870.691543] [DEBUG] Socket path: /var/run/bumblebee.socket
[20870.691548] [DEBUG] Accel/display bridge: auto
[20870.691555] [DEBUG] VGL Compression: proxy
[20870.691561] [DEBUG] VGLrun extra options:
[20870.691568] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[20870.691640] [DEBUG]Using auto-detected bridge virtualgl
[20889.595163] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[20889.595182] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[20889.595186] [DEBUG]Socket closed.
[20889.595203] [ERROR]Aborting because fallback start is disabled.
[20889.595206] [DEBUG]Killing all remaining processes.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Aşağıdaki komutun çıktısına bakalım.

Kod: [Seç]
dpkg -l | grep xserver-xorg-legacy
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
Bu çıktıyı alıyorum
Kod: [Seç]
dpkg -l | grep xserver-xorg-legacy
ii  xserver-xorg-legacy                          2:1.18.4-0ubuntu0.1                        amd64        setuid root Xorg server wrapper
« Son Düzenleme: 24 Ekim 2016, 22:01:52 Gönderen: ahme_t »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Aşağıdaki komutla xserver-xorg-legacy paketini kaldırıp sistemi yeniden başlatmayı deneyiniz.

Kod: [Seç]
sudo apt-get purge xserver-xorg-legacy
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
malesef yine olmadı
linuxminti yeniden kurdum 361 370 arası tüm srücüleri tek tek denedim sonuç aynı malesef  :(

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
/etc/bumblebee/xorg.conf.nvidia  dosyasını açıp, aşağıdaki satırı silip

Kod: [Seç]
    Option "UseDisplayDevice" "none"
yerine girintilere dikkat ederek aşağıdaki satırı eklemeyi dener misiniz?

Kod: [Seç]
    Option "ConnectedMonitor" "DFP"
Aşağıdaki gibi olacak.

Kod: [Seç]
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
EndSection
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
Emekleriniz için çok teşekkür ederim ama malesef sonuç aynı

Kod: [Seç]
sudo nano /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:0a:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
EndSection
Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

Kod: [Seç]
cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-370
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-370:/usr/lib32/nvidia-370
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-370/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau


Kod: [Seç]
dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                                    3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                             3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
rc  nvidia-361                                   361.45.18-0ubuntu0~gpu16.04.1              amd64        NVIDIA binary driver - version 361.45.18
ii  nvidia-370                                   370.28-0ubuntu0~gpu16.04.2                 amd64        NVIDIA binary driver - version 370.28
ii  nvidia-prime-applet                          1.0.5                                      all          An applet for NVIDIA Prime
ii  nvidia-settings                              370.28-0ubuntu0~gpu16.04.1                 amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                       20150328-3~xenialppa1                      amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                            20150328-3~xenialppa1                      amd64        Shared libraries for primus
ii  primus-libs:i386                             20150328-3~xenialppa1                      i386         Shared libraries for primus
ii  primus-libs-ia32:i386                        20150328-3~xenialppa1                      i386         Shared libraries for primus (32-bit)
ii  virtualgl                                    2.4.1-1~xenialppa1                         amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                         2.4.1-1~xenialppa1                         amd64        Library files for virtualgl

Kod: [Seç]
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
0a:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

Kod: [Seç]
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok

Kod: [Seç]
optirun -vvv glxgears
[  197.280963] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  197.281608] [INFO]Configured driver: nvidia
[  197.281928] [DEBUG]optirun version 3.2.1 starting...
[  197.281953] [DEBUG]Active configuration:
[  197.281968] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  197.281984] [DEBUG] X display: :8
[  197.281996] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-370:/usr/lib32/nvidia-370
[  197.282011] [DEBUG] Socket path: /var/run/bumblebee.socket
[  197.282025] [DEBUG] Accel/display bridge: auto
[  197.282039] [DEBUG] VGL Compression: proxy
[  197.282054] [DEBUG] VGLrun extra options:
[  197.282068] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  197.282157] [DEBUG]Using auto-detected bridge virtualgl
[  197.578840] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  197.578857] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  197.578862] [DEBUG]Socket closed.
[  197.578878] [ERROR]Aborting because fallback start is disabled.
[  197.578882] [DEBUG]Killing all remaining processes.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Aşağıdaki satırları /etc/bumblebee/xorg.conf.nvidia dosyasından silmeyi dener misiniz?

Kod: [Seç]
Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
ilginiz için çok teşekkürler ama malesef hala sonuç aynı

Kod: [Seç]
optirun -vvv glxgears
[  102.305782] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  102.306007] [INFO]Configured driver: nvidia
[  102.306090] [DEBUG]optirun version 3.2.1 starting...
[  102.306102] [DEBUG]Active configuration:
[  102.306107] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  102.306113] [DEBUG] X display: :8
[  102.306119] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-370:/usr/lib32/nvidia-370
[  102.306126] [DEBUG] Socket path: /var/run/bumblebee.socket
[  102.306131] [DEBUG] Accel/display bridge: auto
[  102.306138] [DEBUG] VGL Compression: proxy
[  102.306142] [DEBUG] VGLrun extra options:
[  102.306147] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  102.306176] [DEBUG]Using auto-detected bridge virtualgl
[  102.607099] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  102.607114] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  102.607119] [DEBUG]Socket closed.
[  102.607133] [ERROR]Aborting because fallback start is disabled.
[  102.607137] [DEBUG]Killing all remaining processes.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16737
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Intel GPU ile ilgili yapılandırma dosyası oluşturdunuz mu hiç, aşağıdaki komutların çıktısına bakalım.

Kod: [Seç]
ls /usr/share/X11/xorg.conf.d/
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı ahme_t

  • Çok Yeni Penguen
  • *
  • İleti: 13
  • Dağıtım: Linux Mint 18
  • Grafik Kartı: Nvidia 840M
  • İşlemci: İntel İ5
malesef yapıp yapmadığımı bilmiyorum. işlem basamaklarını harfiyyen uyguladım sadece

Kod: [Seç]
ls /usr/share/X11/xorg.conf.d/
10-amdgpu.conf        11-evdev-trackpoint.conf        50-wacom.conf
10-evdev.conf         50-nvidia-drm-outputclass.conf  51-synaptics-quirks.conf
10-quirks.conf        50-synaptics.conf               glamoregl.conf
11-evdev-quirks.conf  50-vmmouse.conf