Gönderen Konu: [Nasıl] Linux Mint 17.x - Intel + Nvidia Hibrit GPU İçin Bumblebee Kurulumu  (Okunma sayısı 101157 defa)

0 Üye ve 2 Ziyaretçi konuyu incelemekte.

Çevrimdışı zoomTR

  • Çok Yeni Penguen
  • *
  • İleti: 17
  • Dağıtım: Mint
  • Masaüstü: cinnamon
  • Grafik Kartı: nvidia g840m
  • İşlemci: intel i 7
Bir sorun olduğunu düşünüyorum
optirun -vvv glxgears çıktısı
Kod: [Seç]
[ 1346.598408] Reading file: /etc/bumblebee/bumblebee.conf
[ 1346.598855] Could not open configuration file: /etc/bumblebee/bumblebee.conf
[ 1346.598903] Using default configuration
[ 1346.599257] optirun version 3.2.1 starting...
[ 1346.599314] Active configuration:
[ 1346.599345]  bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1346.599378]  X display: :8
[ 1346.599410]  LD_LIBRARY_PATH:
[ 1346.599442]  Socket path: /var/run/bumblebee.socket
[ 1346.599474]  Accel/display bridge: auto
[ 1346.599505]  VGL Compression: proxy
[ 1346.599536]  VGLrun extra options:
[ 1346.599568]  Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1346.599659] Using auto-detected bridge virtualgl
[ 1346.796873] Response: No - error:  (EE)  KMS not enabled

[ 1346.796884] Cannot access secondary GPU - error:  (EE)  KMS not enabled

[ 1346.796888] Socket closed.
[ 1346.796902] Aborting because fallback start is disabled.
[ 1346.796906] Killing all remaining processes.

cat /etc/bumblebee/bumblebee.conf çıktısı
Kod: [Seç]
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.

# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.

# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in  is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-304
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-304:/usr/lib32/nvidia-304
# comma-separated path of the directory containing nvidia_drv.so and the
 default Xorg modules path
XorgModulePath=/usr/lib/nvidia-304/xorg,/usr/lib/xorg/modules

XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Kod: [Seç]
cat /etc/bumblebee/xorg.conf.nvidia  çıktısı
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:03:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
  cat /etc/X11/xorg.conf çıktısı
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok

dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl' çıktısı
Kod: [Seç]
ii  bumblebee                                   3.2.1-93~trustyppa1                                 amd64        NVIDIA Optimus support
ii  bumblebee-nvidia                            3.2.1-93~trustyppa1                                 amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-352                                  352.79-0ubuntu0~gpu14.04.1                          amd64        NVIDIA binary driver - version 352.79
rc  nvidia-364                                  364.19-0ubuntu0~gpu14.04.1                          amd64        NVIDIA binary driver - version 364.19
rc  nvidia-opencl-icd-352                       352.63-0ubuntu0.14.04.1                             amd64        NVIDIA OpenCL ICD
ii  nvidia-opencl-icd-364                       364.19-0ubuntu0~gpu14.04.1                          amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                                0.6.2linuxmint1                                     amd64        Tools to enable NVIDIA's Prime
ii  nvidia-prime-applet                         1.0.3                                               all          An applet for NVIDIA Prime
ii  nvidia-settings                             364.15-0ubuntu0~gpu14.04.1                          amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                      20150328-1~trustyppa1                               amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                           20150328-1~trustyppa1                               amd64        Shared libraries for primus
ii  primus-libs:i386                            20150328-1~trustyppa1                               i386         Shared libraries for primus
ii  primus-libs-ia32:i386                       20150328-1~trustyppa1                               i386         Shared libraries for primus (32-bit)
ii  virtualgl                                   2.4.1-1~trustyppa1                                  amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                        2.4.1-1~trustyppa1                                  amd64        Library files for virtualgl

Kod: [Seç]
lspci | egrep 'VGA|3D|Display' çıktısı
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

Şimdiden teşekkürler.


Düzenleme : Kod etiketi
« Son Düzenleme: 03 Mayıs 2016, 21:57:13 Gönderen: Butterfly »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Siz sadece kurulum yapmışsınız, konudaki "2 - Kurulum Sonrası Düzenleme" adımlarını uygulayınız.
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı mycrosoft

  • Çok Yeni Penguen
  • *
  • İleti: 9
  • Dağıtım: Linux Mint 18
  • Masaüstü: Cinnamon
  • Grafik Kartı: NVIDIA GeForce GTX 960M
  • İşlemci: Intel Core i5 5700HQ
Bütün çıktılar bunlar:

Kod: [Seç]
emircan@emircan ~/Masaüstü $ optirun -vvv glxgears
[  103.621462] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  103.621654] [INFO]Configured driver: nvidia
[  103.621843] [DEBUG]optirun version 3.2.1 starting...
[  103.621864] [DEBUG]Active configuration:
[  103.621867] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  103.621869] [DEBUG] X display: :8
[  103.621871] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-367:/usr/lib32/nvidia-current
[  103.621874] [DEBUG] Socket path: /var/run/bumblebee.socket
[  103.621876] [DEBUG] Accel/display bridge: auto
[  103.621880] [DEBUG] VGL Compression: proxy
[  103.621882] [DEBUG] VGLrun extra options:
[  103.621884] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[  103.630683] [DEBUG]Using auto-detected bridge primus
[  104.875723] [INFO]Response: Yes. X is active.

[  104.875742] [INFO]Running application using primus.
[  104.875871] [DEBUG]Process glxgears started, PID 2133.
Error: couldn't get an RGB, Double-buffered visual
[  104.995617] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  104.995645] [DEBUG]Socket closed.
[  104.995663] [DEBUG]Killing all remaining processes.
emircan@emircan ~/Masaüstü $ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-367
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-367/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

emircan@emircan ~/Masaüstü $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
emircan@emircan ~/Masaüstü $ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Böyle bir dosya ya da dizin yok
emircan@emircan ~/Masaüstü $ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                                    3.2.1-10                                   amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                             3.2.1-10                                   amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-367                                   367.27-0ubuntu0~gpu16.04.1                 amd64        NVIDIA binary driver - version 367.27
ii  nvidia-settings                              367.18-0ubuntu0~gpu16.04.1                 amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                       0~20150328-1                               amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                            0~20150328-1                               amd64        Shared libraries for primus
ii  primus-libs:i386                             0~20150328-1                               i386         Shared libraries for primus
ii  primus-libs-ia32:i386                        0~20150328-1                               i386         Shared libraries for primus (32-bit)
emircan@emircan ~/Masaüstü $ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 0a)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
emircan@emircan ~/Masaüstü $

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Alıntı
LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-current

/etc/bumblebee/bumblebee.conf dosyasındaki yukarıdaki satırı aşağıdaki şekilde değiştirip,

Kod: [Seç]
LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-367
dosyayı kaydetmeyi ve ardından aşağıdaki komutla Bumbelbee servisini yeniden başlatmayı denetiniz.

Kod: [Seç]
sudo service bumblebeed restart
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı tux5

  • Yeni Penguen
  • *
  • İleti: 41
  • Dağıtım: Linux Mint 18 Cinnamon 64 Bit
Linux Mint 18'de bumblebee PPA'yı eklerken şu hata geliyor.
Kod: [Seç]
$ sudo add-apt-repository ppa:bumblebee/stable
'This PPA does not support xenial'
Cannot add PPA: ''This PPA does not support xenial''.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Konu Linux Mint 18 için güncellenmiştir.
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı serenler

  • Çok Yeni Penguen
  • *
  • İleti: 4
  • Dağıtım: mint 13 maya
  • Masaüstü: kde
kurulumu yapamadım bi türlü arkadaşlar yardım eder misiniz?
Kod: [Seç]
inxi -SGx
,System:    Host: uiea-Inspiron-N5110 Kernel: 3.2.0-23-generic x86_64 (64 bit, gcc: 4.6.3)
           Desktop: KDE 4.8.5 (Qt 4.8.1) Distro: Linux Mint 13 Maya
Graphics:  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0
           Card-2: NVIDIA GF108M [GeForce GT 525M] bus-ID: 01:00.0
           X.Org: 1.11.3 drivers: intel (unloaded: vesa,fbdev) Resolution: 1366x768@60.0hz
           GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A

Kod: [Seç]
glxinfo | grep render
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  136 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Kod: [Seç]
lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev a1)

Kod: [Seç]
xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768       60.0*+   40.1 
   1360x768       59.8     60.0 
   1024x768       60.0 
   800x600        60.3     56.2 
   640x480        59.9 
VGA1 disconnected (normal left inverted right x axis y axis)

Kod: [Seç]
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory

Kod: [Seç]
sudo add-apt-repository ppa:graphics-drivers/ppa
[sudo] password for uiea:
You are about to add the following PPA to your system:
 Fresh drivers from upstream, currently shipping Nvidia.
                                                                                                                                                                                               
## Current Status                                                                                                                                                                               
                                                                                                                                                                                               
We currently recommend: `nvidia-361`, Nvidia's current long lived branch.                                                                                                                       
For GeForce 8 and 9 series GPUs use `nvidia-340`
For GeForce 6 and 7 series GPUs use `nvidia-304`

## What we're working on right now:

- Normal driver updates
- Investigating how to bring this goodness to distro on a cadence.

## WARNINGS:

This PPA is currently in testing, you should be experienced with packaging before you dive in here. Give us a few days to sort out the kinks.

Volunteers welcome! See also: https://github.com/mamarley/nvidia-graphics-drivers/

### How you can help:

## Install PTS and benchmark your gear:

    sudo apt-get install phoronix-test-suite

Run the benchmark:

    phoronix-test-suite default-benchmark openarena xonotic tesseract gputest unigine-valley

and then say yes when it asks you to submit your results to openbechmarking.org. Then grab a cup of coffee, it takes a bit for the benchmarks to run. Depending on the version of Ubuntu you're using it might preferable for you to grabs PTS from upstream directly: http://www.phoronix-test-suite.com/?k=downloads

## Share your results with the community:

Post a link to your results (or any other feedback to): https://launchpad.net/~graphics-drivers-testers

Remember to rerun and resubmit the benchmarks after driver upgrades, this will allow us to gather a bunch of data on performance that we can share with everybody.

If you run into old documentation referring to other PPAs, you can help us by consolidating references to this PPA.

If someone wants to go ahead and start prototyping on `software-properties-gtk` on what the GUI should look like, please start hacking!

## Help us Help You!

We use the donation funds to get the developers hardware to test and upload these drivers, please consider donating to the "community" slider on the donation page if you're loving this PPA:

http://www.ubuntu.com/download/desktop/contribute
 More info: https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa
Press [ENTER] to continue or ctrl-c to cancel adding it

Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.MzaMJjoHhK --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 2388FF3BE10A76F638F80723FCAE110B1118213C
gpg: requesting key 1118213C from hkp server keyserver.ubuntu.com
gpg: key 1118213C: "Launchpad PPA for Graphics Drivers Team" not changed
gpg: Total number processed: 1
gpg:              unchanged: 1


Kod: [Seç]
sudo add-apt-repository ppa:bumblebee/stable
You are about to add the following PPA to your system:
 Bumblebee Stable PPA

Installation instructions: https://wiki.ubuntu.com/Bumblebee

To report issues, please read http://wiki.Bumblebee-Project.org/Reporting-Issues

You may use any nvidia driver flavor, like -updates, -experimental or -nnn ones.

After installation, reboot to let changes apply.

To see if it works, run during around 30s: glxspheres
Then, run it with optirun, and compare: optirun glxspheres

If you want to use primus, you need to install it and set Bridge=primus in bumblebee.conf or use optirun -b primus. You also need to install primus-libs-ia32 if you want to run 32-bit apps.

Be aware that as Bumblebee is using low-level hardware informations, it is impossible to run it in a VM.
 More info: https://launchpad.net/~bumblebee/+archive/ubuntu/stable
Press [ENTER] to continue or ctrl-c to cancel adding it

Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.pA8vIuxVd4 --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 46C0364A882F14F899448FFCB22A95F88110A93A
gpg: requesting key 8110A93A from hkp server keyserver.ubuntu.com
gpg: key 8110A93A: "Launchpad PPA for Bumlebee Project" not changed
gpg: Total number processed: 1
gpg:              unchanged: 1

Kod: [Seç]
sudo apt-get update
Hit http://archive.ubuntu.com precise Release.gpg
Hit http://archive.ubuntu.com precise-updates Release.gpg                                                                                       
Hit http://ppa.launchpad.net precise Release.gpg                                                                                                 
Hit http://ppa.launchpad.net precise Release.gpg                                                                                                 
Get:1 http://packages.medibuntu.org precise Release.gpg                                                         
Hit http://security.ubuntu.com precise-security Release.gpg                                                                         
Hit http://archive.ubuntu.com precise Release                                                                                       
Hit http://packages.linuxmint.com maya Release.gpg                                                                                                               
Hit http://archive.canonical.com precise Release.gpg                                                                                                             
Hit http://ppa.launchpad.net precise Release                                                                                                                               
Hit http://security.ubuntu.com precise-security Release                                                                                                                                       
Hit http://archive.ubuntu.com precise-updates Release                                                                                                                                         
Hit http://archive.canonical.com precise Release                                                                                                                                               
Hit http://ppa.launchpad.net precise Release                                                                                                                                                   
Hit http://archive.canonical.com precise/partner amd64 Packages                                                                                                                 
Hit http://ppa.launchpad.net precise/main Sources                                                                                       
Hit http://ppa.launchpad.net precise/main amd64 Packages                                                         
Hit http://ppa.launchpad.net precise/main i386 Packages                                                           
Hit http://ppa.launchpad.net precise/main TranslationIndex                                                       
Get:2 http://archive.ubuntu.com precise/universe amd64 Packages [4.786 kB]                                       
Get:3 http://security.ubuntu.com precise-security/main amd64 Packages [616 kB]                                   
Get:4 http://packages.medibuntu.org precise Release                                                                                                                             
Hit http://packages.linuxmint.com maya Release                                                                                                               
Hit http://archive.canonical.com precise/partner TranslationIndex                                                                                           
Hit http://ppa.launchpad.net precise/main Sources                                                                                                                                         
Hit http://ppa.launchpad.net precise/main amd64 Packages                                                                                                                                   
Hit http://ppa.launchpad.net precise/main i386 Packages                                                                                                                                   
Hit http://ppa.launchpad.net precise/main TranslationIndex                                                                                                                                 
Ign http://packages.medibuntu.org precise Release                                                                                                                                             
N: Ignoring file 'medibuntu.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension                                                                         
N: Ignoring file 'bumblebee-stable-precise.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'local-repository.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'graphics-drivers-ppa-precise.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'ubuntu.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'mint.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
E: GPG error: http://packages.medibuntu.org precise Release: The following signatures were invalid: NODATA 1 NODATA 2

Kod: [Seç]
sudo apt-get install bumblebee nvidia-364 nvidia-settings bumblebee-nvidia primus virtualgl linux-headers-$(uname -r)
Reading package lists... Done
Building dependency tree       
Reading state information... Done
linux-headers-3.2.0-23-generic is already the newest version.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 nvidia-364 : Depends: libwayland0 but it is not installable
              Recommends: libcuda1-364 but it is not going to be installed
              Recommends: nvidia-opencl-icd-364 but it is not going to be installed
 nvidia-settings : Depends: pkg-config but it is not installable
                   Depends: libjansson4 (>= 2.0.1) but it is not installable
 primus : Depends: socat but it is not installable
          Recommends: primus-libs-ia32
N: Ignoring file 'medibuntu.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'bumblebee-stable-precise.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'local-repository.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'graphics-drivers-ppa-precise.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'ubuntu.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'mint.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
E: Unable to correct problems, you have held broken packages.

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Linux Mint 13 kurmanız için özel bir sebebiniz yoksa daha güncel bir sürüm kurmayı deneyiniz. Linux Mint 13 için önce buradaki düzenlemeyi yapınız ve yeniden kurulum deneyiniz.
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı serenler

  • Çok Yeni Penguen
  • *
  • İleti: 4
  • Dağıtım: mint 13 maya
  • Masaüstü: kde
Linux Mint 13 daha kararlı olabilir diye düşünmüştüm o zaman 17 kurayım teşekkürler

Çevrimdışı tux5

  • Yeni Penguen
  • *
  • İleti: 41
  • Dağıtım: Linux Mint 18 Cinnamon 64 Bit
glxgears komutunu verdiğimde şu hatayı alıyorum:
Kod: [Seç]
$ glxgears
Error: couldn't get an RGB, Double-buffered visual
Diğer çıktılar:
Kod: [Seç]
$ optirun -vvv glxgears
[ 1178.154609] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1178.155096] [INFO]Configured driver: nvidia
[ 1178.155186] [ERROR]You've no permission to communicate with the Bumblebee daemon. Try adding yourself to the 'bumblebee' group
[ 1178.155206] [DEBUG]Socket closed.
[ 1178.155237] [ERROR]Could not connect to bumblebee daemon - is it running?
 $ sudo optirun -vvv glxgears
[ 1184.480232] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1184.480591] [INFO]Configured driver: nvidia
[ 1184.480753] [DEBUG]optirun version 3.2.1 starting...
[ 1184.480767] [DEBUG]Active configuration:
[ 1184.480772] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1184.480776] [DEBUG] X display: :8
[ 1184.480780] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-361:/usr/lib32/nvidia-361
[ 1184.480785] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1184.480790] [DEBUG] Accel/display bridge: auto
[ 1184.480798] [DEBUG] VGL Compression: proxy
[ 1184.480810] [DEBUG] VGLrun extra options:
[ 1184.480817] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
[ 1184.480865] [DEBUG]Using auto-detected bridge virtualgl
[ 1184.902756] [INFO]Response: Yes. X is active.

[ 1184.902770] [INFO]Running application using virtualgl.
[ 1184.902870] [DEBUG]Process vglrun started, PID 24857.
modprobe: FATAL: Module nvidia-modeset not found in directory /lib/modules/4.4.0-21-generic
4188 frames in 5.0 seconds = 837.412 FPS
4185 frames in 5.0 seconds = 836.862 FPS
4207 frames in 5.0 seconds = 841.170 FPS
4013 frames in 5.0 seconds = 802.413 FPS
4177 frames in 5.0 seconds = 835.190 FPS
[VGL] ERROR: in readback--
[VGL]    256: Window has been deleted by window manager
[ 1210.420978] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1210.421124] [DEBUG]Socket closed.
[ 1210.421206] [DEBUG]Killing all remaining processes.
Kod: [Seç]
$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-361
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-361:/usr/lib32/nvidia-361
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-361/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Kod: [Seç]
$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:03:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection
Kod: [Seç]
$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
Kod: [Seç]
$ dpkg -l | egrep 'nvidia|bumblebee|primus|prime|virtualgl'
ii  bumblebee                                    3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                             3.2.1-96~xenialppa1                        amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-361                                   361.45.18-0ubuntu0~gpu16.04.1              amd64        NVIDIA binary driver - version 361.45.18
ii  nvidia-prime-applet                          1.0.4                                      all          An applet for NVIDIA Prime
ii  nvidia-settings                              367.18-0ubuntu0~gpu16.04.1                 amd64        Tool for configuring the NVIDIA graphics driver
ii  primus                                       20150328-1~xenialppa1                      amd64        client-side GPU offloading for NVIDIA Optimus
ii  primus-libs:amd64                            20150328-1~xenialppa1                      amd64        Shared libraries for primus
ii  primus-libs:i386                             20150328-1~xenialppa1                      i386         Shared libraries for primus
ii  primus-libs-ia32:i386                        20150328-1~xenialppa1                      i386         Shared libraries for primus (32-bit)
ii  virtualgl                                    2.4.1-1~xenialppa1                         amd64        Toolkit for displaying OpenGL applications to thin clients
ii  virtualgl-libs:amd64                         2.4.1-1~xenialppa1                         amd64        Library files for virtualgl
Kod: [Seç]
$ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev ff)

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Alıntı
Try adding yourself to the 'bumblebee' group

Aşağıdaki komutla kullanıcıyı bumblebee grubuna ekleyip sistemi yeniden başlatmayı deneyiniz.

Kod: [Seç]
sudo adduser $USER bumblebee
Alıntı
Error: couldn't get an RGB, Double-buffered visual

Bu sorun için libgl1-mesa-dri paketini yeniden kurmayı deneyiniz.

Kod: [Seç]
sudo apt-get install --reinstall libgl1-mesa-dri
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı tux5

  • Yeni Penguen
  • *
  • İleti: 41
  • Dağıtım: Linux Mint 18 Cinnamon 64 Bit
Yine aynı hata geliyor.
Kod: [Seç]
$ glxgears
Error: couldn't get an RGB, Double-buffered visual
Kod: [Seç]
$ sudo adduser $USER bumblebee
The user `mh' is already a member of `bumblebee'

Not:Sistemi yeniden başlattıktan sonra 'Cinnamon just crashed.You are currently runnig in Fallback mode.Do you want to restart Cinnamon.Yes/No' hatası geldi.Bende No'ya bastım.
« Son Düzenleme: 02 Temmuz 2016, 23:09:48 Gönderen: tux5 »

Çevrimdışı Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16926
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.2 & LMDE 3
  • Masaüstü: Cinnamon 4.2 & Mate 1.22
Aşağıdaki komutun çıktısına bakalım.

Kod: [Seç]
cat /etc/modprobe.d/bumblebee.conf
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı tux5

  • Yeni Penguen
  • *
  • İleti: 41
  • Dağıtım: Linux Mint 18 Cinnamon 64 Bit
Kod: [Seç]
$ cat /etc/modprobe.d/bumblebee.conf
# This file is installed by bumblebee, do NOT edit!
# to be used by kmod / module-init-tools, and installed in /etc/modprobe.d/
# or equivalent

# do not automatically load nouveau as it may prevent nvidia from loading
blacklist nouveau
# do not automatically load nvidia as it's unloaded anyway when bumblebeed
# starts and may fail bumblebeed to disable the card in a race condition.
# Debian
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-legacy-304xx
blacklist nvidia-legacy-340xx
# Ubuntu
blacklist nvidia
blacklist nvidia-current
blacklist nvidia-current-updates
# 304
blacklist nvidia-304
blacklist nvidia-304-updates
blacklist nvidia-experimental-304
# 310
blacklist nvidia-310
blacklist nvidia-310-updates
blacklist nvidia-experimental-310
# 313
blacklist nvidia-313
blacklist nvidia-313-updates
blacklist nvidia-experimental-313
# 319
blacklist nvidia-319
blacklist nvidia-319-updates
blacklist nvidia-experimental-319
# 325
blacklist nvidia-325
blacklist nvidia-325-updates
blacklist nvidia-experimental-325
# 331
blacklist nvidia-331
blacklist nvidia-331-updates
blacklist nvidia-experimental-331
# 334
blacklist nvidia-334
blacklist nvidia-334-updates
blacklist nvidia-experimental-334
# 337
blacklist nvidia-337
blacklist nvidia-337-updates
blacklist nvidia-experimental-337
# 340
blacklist nvidia-340
blacklist nvidia-340-updates
blacklist nvidia-experimental-340
# 343
blacklist nvidia-343
blacklist nvidia-343-updates
blacklist nvidia-experimental-343
# 346
blacklist nvidia-346
blacklist nvidia-346-updates
blacklist nvidia-experimental-346
# 349
blacklist nvidia-349
blacklist nvidia-349-updates
blacklist nvidia-experimental-349
# 352
blacklist nvidia-352
blacklist nvidia-352-updates
blacklist nvidia-experimental-352
# 355
blacklist nvidia-355
blacklist nvidia-355-updates
blacklist nvidia-experimental-355
# 358
blacklist nvidia-358
blacklist nvidia-358-updates
blacklist nvidia-experimental-358
# 361
blacklist nvidia-361
blacklist nvidia-361-updates
blacklist nvidia-experimental-361
# 364
blacklist nvidia-364
blacklist nvidia-364-updates
blacklist nvidia-experimental-364

Çevrimdışı serenler

  • Çok Yeni Penguen
  • *
  • İleti: 4
  • Dağıtım: mint 13 maya
  • Masaüstü: kde
Linux Mint 13 kurmanız için özel bir sebebiniz yoksa daha güncel bir sürüm kurmayı deneyiniz. Linux Mint 13 için önce buradaki düzenlemeyi yapınız ve yeniden kurulum deneyiniz.


1-son kullanıcı için kararlı ve güncel bir dağıtım olarak hangisini önerirsiniz?
2-Linux Mint 13'ü kaldırmadan yani yükleyici cd ya da usb kullanmadan dağıtımımı nasıl yükseltebilirim? Eminim forumda var ama bulamadım. Bağlantısını paylaşabilir misiniz?