Gönderen Konu: [COZULDU] lmde kurduktan sonra açılışta siyah ekranda kalıyor.  (Okunma sayısı 15337 defa)

0 Üye ve 2 Ziyaretçi konuyu incelemekte.

Çevrimiçi Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16579
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Ynt: [COZULDU] lmde kurduktan sonra açılışta siyah ekranda kalıyor.
« Yanıtla #15 : 08 Kasım 2014, 23:58:38 »
Aşağıdaki komut ile /etc/bumblebee/bumblebee.conf dosyasını açınız.

Kod: [Seç]
sudo gedit /etc/bumblebee/bumblebee.conf
Açılan dosyada aşağıdaki satırı,

Kod: [Seç]
Driver=
aşağıdaki şekilde değiştirip dosyayı kaydediniz.

Kod: [Seç]
Driver=nvidia
Aşağıdaki komut ile Bumblebee servisini yeniden başlatınız.

Kod: [Seç]
sudo service bumblebeed restart
Sonrasında aşağıdaki komut ile Bumblebee'yi kontrol edebilirsiniz.

Kod: [Seç]
optirun -vvv glxgears
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı muarke

  • Çok Yeni Penguen
  • *
  • İleti: 19
  • Dağıtım: LMDE
Ynt: [COZULDU] lmde kurduktan sonra açılışta siyah ekranda kalıyor.
« Yanıtla #16 : 09 Kasım 2014, 11:59:44 »
Kod: [Seç]
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
[color=red][b]Driver=nvidia[/b][/color]
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
[color=red][b]KernelDriver=nvidia-current[/b][/color]
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

 istediginiz yerleri degistirdim ama ayni hata
Kod: [Seç]
muarke@tr3x:~$ optirun -vvv glxgears
[ 1516.403133] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1516.403827] [INFO]Configured driver: nvidia
[ 1516.404206] [DEBUG]optirun version 3.2.1 starting...
[ 1516.404274] [DEBUG]Active configuration:
[ 1516.404309] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1516.404342] [DEBUG] X display: :8
[ 1516.404375] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 1516.404407] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1516.404437] [DEBUG] Accel/display bridge: auto
[ 1516.404467] [DEBUG] VGL Compression: proxy
[ 1516.404500] [DEBUG] VGLrun extra options:
[ 1516.404532] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 1516.404627] [DEBUG]Using auto-detected bridge primus
[ 1516.575925] [INFO]Response: No - error: Could not load GPU driver

[ 1516.575957] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ 1516.575967] [DEBUG]Socket closed.
[ 1516.575997] [ERROR]Aborting because fallback start is disabled.
[ 1516.576027] [DEBUG]Killing all remaining processes.

devam etmekte.

Çevrimiçi Butterfly

  • Proje Sorumlusu
  • *****
  • İleti: 16579
  • Linux Mint Türkiye
  • Dağıtım: Linux Mint 19.1 & LMDE 3
  • Masaüstü: Cinnamon 4.0 & Mate 1.20
Ynt: [COZULDU] lmde kurduktan sonra açılışta siyah ekranda kalıyor.
« Yanıtla #17 : 10 Kasım 2014, 21:34:46 »
Aşağıdaki komutların çıktılarını tekrar rica edelim.

Kod: [Seç]
lspci | egrep 'VGA|3D|Display'
cat /etc/bumblebee/xorg.conf.nvidia
Elimizden geldiğince dilimizin döndüğünce...


Çevrimdışı muarke

  • Çok Yeni Penguen
  • *
  • İleti: 19
  • Dağıtım: LMDE
Ynt: [COZULDU] lmde kurduktan sonra açılışta siyah ekranda kalıyor.
« Yanıtla #18 : 11 Kasım 2014, 14:00:03 »
Kod: [Seç]
muarke@tr3x:~$ lspci | egrep 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
0a:00.0 3D controller: NVIDIA Corporation Device 1340 (rev ff)


Kod: [Seç]
muarke@tr3x:~$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
   BusID "PCI:0a:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection